SETO TEKNOLOG PVT. LTD. | Creating solutions for challenging needs

Service

Support

Jobs

Order

Reactive Power Transducer

This transducer is used for measurement of Reactive Power for single phase (STE-A-4T) system as well as for

3-phase, 3-wire (STE-B-4T) system and 3-phase 4-wire (STE-C-4T) systems with balance and unbalanced load. They are suitable for measurement of both import and export of power. The output is a load independent DC current or voltage which is proportional to input power. The output can be connected directly to indicating instruments or to data transmission system.

Features

Available in accuracy class index - 0.2, 0.5, & 1.0
Withstands wide temperature variations.
VA burden on CT/PT very low. - < 0.5 VA
Low internal consumption.
Wide range of Input / Output to meet National / International requirements.
Comply to revised IEC 688-1 standards.
Flexibility in auxiliary power supply requirements - A.C. / D.C.
Rugged and vibration resistant.
Withstands seismic test as per IEC 344-1974 for Nuclear Power Applications.
Available in dust proof sheet plastic enclosures suitable for Back panel / Din rail mounting.
Multiple outputs also available - upto 4.
High input / Output isolations - 4.0 KV.

Characteristics

Technical Data

Measuring Range	0-0.8-1.2 Vn x In
Rated Input	110/415V AC, 1/5A AC
Input Frequency	50Hz +/- 10%
Internal Consumption	< 0.5 VA for each input < 4VA for ry voltage Self Powered
Auxiliary Power Supply	110/240 V AC 12/24/48/110/220V DC Self Powered
Nominal Output (Unipolar/Bipolar)	0-2.5-5.0 mA DC 0-5mA DC / 4-20mA 10-0-10 mA DC
Load Range (Ohms) a) Current Output b) Voltage Output	Max 15V/Iout Min 5K Ohms
Residual A.C. Ripple	< 1% (P-P)
Overload Capacity a) Continuous b) Momentary	1.2 Vn, 2.0 In 2.0 Vn for 1 sec 20 In for 1 sec.
Accuracy Class	0.3/0.5/1.0
Response Time	< 0.5 sec
Input - output Isolation	4 KV
Operating Temperature	0 - 50°C
Impulse Voltage Test	Confirms to IEC 251- 5KV having waveform of 1.2/50 microseconds.
HF Interference	Confirms to IEC 255-4
Environment Condition	User group II as per IEC 688
Configuration	1-Phase,3-Phase/3-wire,3-Phase/4-wire
Number of output	1, 2, 3

Block Diagram

Visitor(s) Till Date